Available with us is a wide range of Stainless Steel Clamps in various grades of materials, dimensions, spacing patterns and welding methods. These have 66% to 75% of the lining depth, whereas the spacing depends on material type, operating conditions and physical characteristics of the unit. Our range is known for its features, such as Anchors alloy Hot face temperature, Mild Steel 540°C, Stainless Steel 304 1080°C and Stainless Steel 310 or 316 1350°C.
Refractory fiber & anchor systems are fabricated for all types of monolithic, ceramic fiber and brick refractory linings confirming that the exact grade of material, dimensions, spacing patterns and welding methods are selected for an anchorage system which is very necessary for retaining the refractory material and ensures the lining performance fixing. Generally refractory anchors to be 66% to 75% of the lining depth however the anchors should not extend closer than 25 mm to the lining surface. Anchor spacing depends on the type of material used, the operating conditions and the physical characteristics of the unit being lined. Generally the more severe the operating conditions the closer the anchors should be spaced and spacing should also alter according to the material density.
Our range is available in expanded metal, hex steel grid and special grid. These are available in stainless steel grades 304, 316, 310, 321 as well as carbon steel, alloy steel and other standard grades and thickness varies from 3 mm to 12 mm.